Boot Disk Failure Insert System Disk And Press Enter

Posted by MJ  |  at  8:37 PM No comments

Boot Disk Failure is one of the basic problem that we encountered in our computer. This Problem is cause by losing hard disk drive or the hard disk drive was not detected by the computer. Hard Disk Drive is the system storage of the computer so if it is not detected you cannot load into your operating system unless you will used a live operating system stored in compact disk.

Here is the reason why hard disk drive getting failed. first losing a power supply, loss connection of IDE Cable, Sometimes it happens also when the jumper of the drive was not in proper position and I have also encountered that the drive was detected but the Operating System was failed to load and I found out that there is no Operating System Installed and it means failed.

Here are some Idea on How to fix Boot disk Failure first go to the bios system and try to auto detect all hard drive if it is not detected change the power supply connected in the Hard Drive then go back to the bios system and auto detect again all the hard drives, if it is not detected again change the IDE Cable connected on the Hard Disk then auto detect it on bios, another solution is remove the jumper of the Hard disk so the system will automatically detect the settings for the Hard disk and last suggestion check it first if there is an Operating System installed in a computer because without an operating system it means failure even your hard disk drive detected.